Just plug it into any wall outlet in your home, turn it on, and start saving energy and money! Stop paying for wasted electricity! Plug in the POWERGARD and save up to 10% on your electricity bill and reduce your carbon footprint.
The POWERGARD is an exciting and innovative new product that saves homeowners money by reducing power consumption. The POWERGARD's unique capacitance circuitry reduces the amount of power drawn from the utility company by storing otherwise lost electricity caused by inductive motors in home appliances (air conditioning units, refrigerators, dishwashers, vacuum cleaners, fans, etc.) and equipment (fluorescent lights, televisions, PCs, printers, etc.).
The POWERGARD is suitable for use in houses, condominiums, apartments, shops, restaurants and offices.
Each POWERGARD unit is designed to manage electricity for up to 1500KWH usage per month. Buy one unit if your monthly usage is 1500KWH or less; buy two units if your monthly usage exceeds 1500KWH per month.
The new innovative 21st century PowerGard CT-1688 is designed for home use. Simply plug into any wall outlet. It instantly begins to reduce power and electricity consumption in your home or office.
Improves power factor of appliances
Reduces the impact of power surges
Increases the efficiency of your appliances by stabilizing voltage
Specially designed for inductive and capacitive devices such as air conditioners, washing machines, stereos, fluorescent lamps, eclectic fans, televisions, microwave ovens and many more!
PowerGard is safe to use 24 hours a day, all year round.
Built in fuse protection
Save up to 10% and more on your monthly utility bill.
900,000 customers are saving money right now!
Worldwide distribution
No Installation required - Just plug-n-save!
Pays for itself in an average of less than one year
POWERGARD is a brilliant device which is the result of research and technical cooperation between Taiwan and one of Japan's foremost manufacturers of industrial power-saving equipment, with a combined 30 years of experience in energy saving technology.
Patented in Taiwan: Utility Patent # 179763
Trademark registered in Taiwan # 01014866
Certified by JIS (Japan): Certificate # TW9596
Technical appraisal by Quality Inspecting and Testing Centre for Electrical Industry Equipments and Meters under the China Electrical Power Research Institute: Report # 034 (2004)
Recomended Use
Apply one PowerGard to each phase. The device can be use in any country that has an electricity supply of 110 to 130 VAC 60Hz or 220 to 240 VAC 50Hz.
The PowerGard is not designed for heavy duty load or monthly consumption higher than 6000kwh.
Manufacturer's Warranty
If the unit is defective under normal us, the unit will be replaced within one year of purchase
Attempting to break the sticker or open the unit will void the warranty of the unit.
The certificate must bear the stamp of the authorized distributor for identification.
What Is Power Factor Optimization/Correction
Power factor is the ratio of true power or watts to apparent power or volt amps. They are identical only when current and voltage are in phase than the power factor is 1.0. The power in an ac circuit is very seldom equal to the direct product of the volts and amperes. In order to find the power of a single phase ac circuit the product of volts and amperes must be multiplied by the power factor. Amp meters and voltmeters indicate the effective value of amps and volts. True power or watts can be measured with a watt-meter. If the true power is 1870 watts and the volt amp reading is 2200. Than the power factor is 0.85 or 85 percent. True power divided by apparent power. The power factor is expressed in decimal or percentage. Thus power factors of 0.8 are the same as 80 percent. Low power factor is usually associated with motors and transformers. An incandescent bulb would have a power factor of close to 1.0. A one hp motor about 0.80. With low power factor loads, the current flowing through electrical system components is higher than necessary to do the required work. This results in excess heating, which can damage or shorten the life of equipment, A low power factor can also cause low-voltage conditions, resulting in dimming of lights and sluggish motor operation.
